Salt Spray Test Chamber - Model(HB-SC808)
Product Description
Salt Spray Test Chamberadapted to the surface treatment of various materials , including paint , electroplating , organic and inorganic coating , anode processing , antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Standard Parameters:
| Item | Specification |
| Internal size | (W*D*H) 900x600x500mm |
| External size | (W*D*H) 1410x880x1280mm |
| Equipment Material | Both inside & outside shell adopt P.V.C rigid plastic board |
| Temperature Range | Room temperature ~ 55℃ |
| Temperature Fluctuations | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Temperature Precision | ±1℃ |
| Spraying Method | Continuous and Periodic spray type |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃
Corrosion-resistant Testing Method (CASS) 50±1℃ |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃
Corrosion-resistant Testing Method (CASS) 63±1℃ |
| Brine Temperature | 35℃±1℃ |
| Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
| PH value | Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Lab Volume | 270L |
| Brine Tank Capacity | 25L |
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over
temperature protection, over load fuse protection |
| Accessories | Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
| Air Source | 1HP Air pump (provided by buyer) |
The table parameters is for the company Standard Model parameters, we support customer customization parameters
Product Features:
- Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
- Reservoirs with mixing system on stand.
- Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
- Exposure zone lined with corrosion-resistant PVC sheets.
- Clear cover allows viewing of test conditions.
- Peaked cover prevents dripping of condensation onto samples.
- Water seal and water level protection system
- Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
- Automatic DI water fills to humidifying tower.
- Digital temperature control.
- Integral over-protection on heaters.
- Low water cut-off protection on humidifying tower.
